Owner's Manual

8 Customer Care Center 1-800-732-2677
How the System Works
The PetSafe
®
Pawz Away
®
Threshold Pet Barrier keeps your pet from entering or leaving a certain room, from going up or down stairs, off of furniture, etc.
Just place the Threshold Transmitter near the area your pet should avoid. The Threshold Pet Barrier transmits an adjustable elliptical radio signal. Your
pet wears a Receiver Collar with Contact Points that touch his neck. When your pet enters the Barrier Area, he’ll hear a series of audible tones from the
Receiver Collar and he will feel a safe Progressive Static Correction, delivered through the Contact Points on his neck. The Progressive Static Correction
will get his attention, but will not cause harm. The correction continues until your pet leaves the Barrier Area. If your pet doesn’t leave, the collar will
continue to correct at the maximum level from 2-3 seconds until the 13-15 second time-out. The PetSafe
®
Pawz Away
®
Threshold Pet Barrier has been
proven safe, comfortable, and effective for pets at least 6 months old and 5 pounds or more.
Key Definitions
Threshold Transmitter: Transmits an adjustable range wireless radio signal.
Barrier Area: Area that you want to prevent your pet from gaining access.
Mode Button: Turns Threshold Transmitter ON/OFF and adjusts the range level setting.
Mode Switch, Standard Mode: Uses normal transmission rate for extended battery life.
Mode Switch, Training Mode: Uses higher transmission rate for faster response.
Receiver Collar: Receives the radio signal when located within the range setting of the
Threshold Transmitter.
Contact Points: Deliver the safe Progressive Static Correction when your pet
enters the Barrier Area.
Progressive Static Correction: Static Correction begins at the lowest level and
automatically increases to maximum within 3 seconds of first detection in the Barrier
Area in the Standard Mode or within 2 seconds in the Training Mode.
Mode Button
LED Indicator
Battery Door
Mode Switch