Owner's Manual

www.petsafe.net 21
Troubleshooting
Threshold Transmitter does
not appear to work.
• Press Mode button and verify Green light turns ON when button is pressed. Check that the Low Battery
Indicator is not flashing Red.
• Check/replace batteries in Threshold Transmitter and Receiver Collar.
• Move the Receiver Collar closer to the Transmitter to test operation.
• If you hold the Mode Button longer than 5 seconds, the Transmitter will turn off.
Barrier Area range is too low. • Check/replace batteries in Receiver Collar and Transmitter.
• Adjust Threshold Transmitter level to increase Barrier Area size.
Barrier Area range is too high. • Adjust Threshold Transmitter level to decrease Barrier Area size.
Pet seems to receive no stimulation. • Check/replace batteries in Receiver Collar.
• Use Test Light Tool to check for static correction.
• Check Receiver Collar fit to ensure Contact Points have direct skin contact.
• Check the setting on the Threshold Transmitter.
Unable to hear Receiver Collar tone. • Check/Replace batteries in Receiver Collar.
• Pets easily hear tone but it may be a volume level that is difficult for you to hear.
• Use the Test Light Tool to check Receiver Collar for Static Correction.
No LED light on Threshold Transmitter. • Press and hold the Mode Button until the Green LED light is ON.
• Check/replace batteries in Threshold Transmitter.