Owner's Manual
Battery
Installation
1. Unscrew the
two
different
colored
halves
of
Toy A
by
hand
and
gently
pull to remove the
battery
and
sound
cylinder
.
2. Firmly pull to remove the retaining
cap
from the end
of
the
battery
and
sound cylinder.
3.
Once
the retaining
cap
is
removed, insert 3
AAA
batteries {not included) into the slots in the side
of
the cylinder.
4 . Locate the notch in the retaining
cap
and
align
it
with the
corresponding
groove
in the
battery
and
sound cylinder. Slide into place.
5. Replace the
battery
and
sound
cylinder
back
into
the speaker end
of
the toy, taking care to match the
speaker end
of
the
cylinder
with the speaker holes
of
the housing.