Owner Manual

petsafe.com 9
Replacement Flaps
Vinyl Flap Replacement and Adjustment
During extreme changes in weather, vinyl aps can shrink during cold months and expand in warmer
months. Easily replace or adjust to ensure a snug t during seasonal changes.
3
To Replace vinyl ap,
remove ap screws and ap
support from top of pet door
frame.
Note:
Interior ap has a
ap support, exterior ap
does not.
To Adjust slightly loosen
ap screws on top of pet
door frame.
Remove vinyl ap and ap
clamp with attached insulated
ap.
Note:
Interior ap clamp
has insulated ap attached,
exterior ap clamp does not.
Replace ap clamp with
attached insulated ap. Insert
new vinyl ap between ap
clamp and ap screw holes
in top of frame. The PetSafe
®
logo should be readable
on vinyl ap. Replace ap
support. Align screw holes
in ap support, frame, vinyl
ap and ap clamp. Replace
and start screws to hold
ap in place. Adjust ap
horizontally until centered in
pet door frame. Adjust ap
vertically until magnet bar on
frame jumps to meet magnet
on bottom of ap. Tighten
screws.
Adjust ap horizontally until
centered in pet door frame.
Adjust ap vertically until
magnet bar on frame jumps
to meet magnet on bottom
of ap. Tighten screws.
1
2