Installation & Assembly

BOOSTER SEAT

Let’s make every seat a window seat.

Insert the U-shaped bracket. (If you have the

largest booster seat, first connect the two bracket

pieces.) Insert the bracket arms into the two plastic

tubes at the front corners.

Place the liner in the booster seat and pass the

safety tether through the slit at the center back.

Unfasten the headrest strap and pass each end

through the slits in the liner. Press the hook and

loop fasteners together.

Refasten the headrest strap and loop it over your

vehicle’s headrest. Adjust the height so your pet can

see out the window.

Buckle the seat belt through the two loops on the

back of the booster seat. If you’re using it on a

bucket seat, fasten the lower strap snugly around

the back of the seat.

Always attach the safety tether to your pet’s

harness and adjust it to keep your pet secure and

safe inside the booster seat.