Owner Manual

petsafe.com 5
LED Light Indicator Quick Guide
LED Color
(Manual Rake Button)
Litter Box Function
Solid Blue The litter box has power and is functioning normally with the rake in home position.
Blinking Blue
The litter box is counting down to the rake cycle (from 20 minutes) or raking is currently
in progress.
Fast Blinking Blue
The rake is paused. This only happens when the manual rake button is pushed while the rake
is in motion.
Blue with Red Flashes
A mechanical error has occurred during the rake cycle. Check for any obstructions around
the rake and remove them if necessary. To reset, press the manual rake button and the rake
should finish the cycle and return to home position. If the error persists, the LED will change to
solid red.
Solid Red
If the light turns solid red after the blue and red flashing, then a mechanical error has
occurred that cannot be fixed by pressing the manual rake button. Please call our Customer
Care Team at [phone] for assistance.
If the LED turns solid red without the blue and red flashing occurring first, then the sensors
are blocked. Remove any obstructions and clean the sensors if necessary.
Specifications and Automatic Operation
Cleaning Cycle:
• Detection sensors recognize when your cat is inside the litter box. A timer starts a 20 minute countdown after your cat leaves the litter box to run
the cleaning cycle. When the timer countdown begins, the LED light on the display will blink blue.
• If your cat returns to the litter box during the timer countdown, the timer stops. The timer countdown will reset when your cat leaves the litter
box again.
• Cleaning cycle automatically runs 20 minutes after your cat leaves the litter box and rakes solid waste into the waste trap.
• Use the manual rake button to run the cleaning cycle at any time.
Cat Usage:
• For single or multiple-cat homes.
• Best for cats under 15 lb.
• It is recommended to have more than one litter box for more than two cats.