Installation Guide

9 Customer Care Center 1-800-732-2677
Replacement Flaps
3
To Replace vinyl ap,
remove ap screws and ap
support from top of pet door
frame.
Note:
Interior ap has a
ap support, exterior ap
does not.
To Adjust slightly loosen
ap screws on top of pet
door frame.
Vinyl Flap Replacement and Adjustment
During extreme changes in weather, vinyl aps can shrink during cold months and expand in warmer
months. Easily replace or adjust to ensure a snug t during seasonal changes.
Remove vinyl ap and ap
clamp with attached insulated
ap.
Note:
Interior ap clamp
has insulated ap attached,
exterior ap clamp does not.
Replace ap clamp with
attached insulated ap. Insert
new vinyl ap between ap
clamp and ap screw holes in
top of frame. The PetSafe
®
logo
should be readable on vinyl
ap. Replace ap support. Align
screw holes in ap support,
frame, vinyl ap and ap clamp.
Replace and start screws to
hold ap in place. Adjust ap
horizontally until centered in
pet door frame. Adjust ap
vertically until magnet bar on
frame jumps to meet magnet
on bottom of ap. Tighten
screws.
Adjust ap horizontally until
centered in pet door frame.
Adjust ap vertically until
magnet bar on frame jumps
to meet magnet on bottom of
ap. Tighten screws.
1
2