Owner's Manual

17
Prepare the receiver collar
7
1. Turn the receiver collar on by pressing and holding the mode
button for 1 second.
The receiver collar will beep low to high and the status light will
flash green. The status light will flash every 5 seconds (green,
yellow, or red) to indicate battery charge.
2. To determine the current correction level, press the mode button
once and observe the row of correction level lights on the top
of the receiver collar.
• If the yellow light is illuminated, the receiver collar is set to
tone and vibration.
• If one or more white lights are illuminated, the receiver
collar is set to static correction. The number of white lights
illuminated indicates the current static correction level (one
white light = level 1 static correction, two white lights = level
2 static correction, and so on).
3. To increase the correction level, press the mode button once
to view the current correction level, then press it again within 8
seconds. Each time you press the mode button within 8 seconds
of the previous press, the correction level increases by one. The
levels increase up through level 7 static correction and then
start over at tone and vibration.
Status light color Meaning
Green Battery is sufficiently charged.
Yellow Battery charge is below 40%.
Red Battery charge is below 20%; charge immediately.
Mode button
White lights = static
correction level 1–7
Yellow light = tone and
vibration only