Owner's Manual

16
4. Press the power button on the transmitter to turn it on.
The LCD screen on the transmitter will turn on and display the
boundary distance.
If you hear an audible alarm and the transmitter LCD
screen is flashing and displaying the wire break warning
icon, it means the transmitter is unable to detect a continuous
loop of boundary wire. (See Troubleshooting on page 26.)
5. Set the boundary distance to 10:
• To decrease the boundary distance, press the - button.
• To increase the boundary distance, press the + button.
The boundary distance is the distance the radio signal travels
from the boundary wire; it is adjustable from 5-15 feet. The
boundary width is twice the boundary distance.