Instructions / Assembly

5
petsafe.com
In the Box
You May Also Need
• Additional wire and flags (Part # PIG00-13769)
• Additional wire connectors
• Additional gel-filled capsules
• Drill and mounting hardware
• Tape measure
• Small Phillips screwdriver
• Pliers
• Staple gun
• Scissors
• Lighter
• Shovel or lawn edger
• Wire stripping pliers
• Waterproofing compound (e.g. silicone caulk)
• PVC pipe or hose pipe
• Circular saw with masonry blade
• Non-metallic collar and leash
• Electrical tape
For setup and training help please visit www.petsafe.com.
How the System Works
The PetSafe
®
Basic In-Ground Fence
™
system allows you to safely keep your pet within the boundary you set. We
have safely used static correction for decades and have helped millions of pets live happier, healthier and more
active lives.
The system works by sending a signal through a buried boundary wire (up to 2,000 ft.). Your pet wears a
receiver collar that picks up the signal. It warns your pet with a beep when he enters the warning zone. If your pet
continues to venture out, the collar will issue a safe static correction will be delivered through the contact points to
get his attention until he returns to the pet area. Of course, different pets respond to different levels of correction.
The collar has 4 levels of correction plus a tone-only setting to accommodate any pet. The system has been
proven safe, comfortable and effective for pets over 8 pounds. Make sure to go through the training as described
in this product manual before leaving your pet unattended.
Test Light
Tool
Gel-filled
Capsules
Surge
Protector
Receiver Collar with
Short Contact Points
PetSafe
®
RFA-67D-11
Battery
Fence Transmitter
Boundary
Flags
(50)
Power
Adapter
Boundary Wire
(500 ft.)
Wire
Connectors
Long
Contact Points