Owner's Manual
Table Of Contents
- Product Manual
- Welcome
- Important Safety Information
- How the System Works
- Charge the Receiver Collar
- Prepare the Receiver Collar
- Fit the Receiver Collar
- Taking Your Pet Out of the Pet Area
- Advanced Features
- Over Correction Protection
- Receiver Collar Status Indicators
- Troubleshooting
- Terms of Use and Limitation of Liability
- Compliance
- Battery Disposal
- Warranty
+1 (800) 732-267710
Turn On the Receiver Collar
The collar will automatically turn on whenever it is removed from the charger. To
turn on the receiver collar when it is not on the charger, press and hold the mode
button for 1 second (2B). Avoid touching the metal contact points.
Next, the indicator light will flash green once and then go off for 1 second. It will
then come back on and glow continuously for 5 seconds—either solid red, solid
green, or red+green together to indicate the status of the battery (2B). Finally,
there will be a series of red flashes which represent the static correction level. This
quick, opening series of tests is part of the ReadyTest
®
startup feature. The receiver
collar will then automatically start the PerfectFit test by flashing red+green together
every second for 90 seconds.
Mode
Button
Indicator
Light
2B