Instructions / Assembly

petsafe.com 25
Troubleshooting
The receiver collar
is not beeping
or correcting.
• Make sure the receiver collar is turned on,
and the battery status lights are flashing every
4 seconds.
• Charge the receiver collar and go through
the ReadyTest
®
startup and PerfectFit
diagnostic tests.
• Check that the fence transmitter power is turned
on and the transmitter status light is solid green.
If not, refer to the YardMax
®
Rechargeable
In-Ground Fence
™
manual.
• In YardMax mode (A), excessive snowfall
(>1½ ft.) may place your pet outside the signal
field. You may need to switch to Traditional
mode (B) or increase the boundary width until
the snow recedes.