Owner's Manual

TROUBLESHOOTING
The Receiver
Collar
•
The tone may be
difficult
to
hear in a
tone
is
not
sounding
noisy environment.
when
setting
up
the
•
Use Test Light as
explained in the
"Test Light
Boundary
Zone.
Instructions"
section, and use it
to
determine
the
location
of
Boundary Zone.
•
Check that the Transmitter is set
up
according
to
directions and install
a new Receiver
Collar
battery.
The Receiver
Collar
•
Check that the Transmitter is
plugged
into a
tone
is
not
sounding
or
working 120-volt outlet, turned on, the Power
administering a
Static
Light is on, and the Transmitter controls are set at
Correction.
your desired settings.
•
Check Receiver battery
to
make sure it is
installed properly.
•
Replace
the battery .
The Receiver
Collar
•
Check that the Transmitter is plugged into a
tone
is
sounding
working standard 120-volt outlet, turned on, the
everywhere.
Power Light is on, and the Transmitter controls
are set at your desired settings.
32
1-800-732-2677