Instructions / Assembly

www.petsafe.net 7
You may need to trim the hair in the area of the Contact Points. Never
shave your pet’s neck; this may lead to a rash or infection.
Always remove your pets Receiver Collar before performing any
Transmitter testing.
The Receiver Collar should not be on your pet when the system is
tested. Your pet may receive an unintended correction.
The Boundary Zone must be tested whenever an adjustment is made
to the Transmitter setting to prevent unintended corrections to your pet.
If you use a collar and leash for training, be sure the extra collar does
not put pressure on the contact points.
To prevent an unintended correction, remove the Receiver Collar from
your pet when indoors.
Never remove power from the system when the collar is on the pet.
This may activate the Receiver Collar.
To prevent an unintended correction, after the Boundary Flags have
been placed, be sure to set the Static Correction on the Receiver
Collar back to Level 1 tone only.