Instructions / Assembly

www.petsafe.net 29
Troubleshooting
The Receiver Collar
tone is not sounding
when setting up the
Boundary Zone.
The tone may be difficult to hear in a noisy environment.
Use Test Light as explained in the “Test Light Instructions”
section, and use it to determine the location of
Boundary Zone.
Check that the Transmitter is set up according to
directions and install a new Receiver Collar battery.
The Receiver Collar
tone is not sounding
or administering a
Static Correction.
Check that the Transmitter is plugged into a working
120 volt outlet, turned on, the Power Light is on, and the
Transmitter controls are set at your desired settings.
Check the receiver battery to make sure that it is
installed properly.
Replace the battery.
The Receiver
Collar tone is
sounding everywhere.
Check that the Transmitter is plugged into a working
standard 120 volt outlet, turned on, the Power Light
is on, and the Transmitter controls are set at your
desired settings.