Instructions / Assembly

www.petsafe.net 13
Set the Static Correction Level
Read all steps before attempting to set the Static Correction Level.
1. Press the Mode Button and release (1D) when the Receiver Indicator
Light illuminates Red (1E).
2. The Receiver Indicator Light will emit a series of red flashes
representing the Static Correction Level.
3. Increase the Static Correction Level by pressing and releasing the
Mode Button within 5 seconds of the previous series of flashes.
The Static Correction levels increase in strength from 1 to 6. Pushing
the Mode Button while the Receiver Collar is on Level 6 will cause the
Receiver Collar to revert to Level 1. Refer to the Function and Response
Table to choose the Static Correction level that best fits your pet.