Owner's Manual

www.petsafe.net 11

Transmitter Range Chart

Boundary Control

Dial Position

Boundary Switch

“–”

Boundary Switch

“+”

1 5-10 ft. 5-10 ft.

2 5-10 ft. 5-10 ft.

3 15-20 ft. 25-35 ft.

4 20-25 ft. 42-55 ft.

5 25-30 ft. 55-65 ft.

6 35-40 ft. 75-85 ft.

7 40-45 ft. 85-90 ft.

8 40-45 ft. 85-90 ft.

Note: These distances are approximate.

Record Your Settings

Location

Final Boundary Switch Setting

(“+” or “–”)

Final Boundary Control

Dial Position (1-8)

Receiver Static

Correction Level (1-6)

Home

Camping

Vacation

Other

Step 4: Place the Boundary Flags

The Boundary Flags are visual reminders for your pet of where the Boundary Zone is located. The Receiver Collar will activate within 2 to 3 feet

of the Boundary Flags.

1. Using the Test Light, with the Static Correction Level set at 2 or

greater, hold the Receiver Collar at your pet’s neck height with logo

side facing away from the Transmitter.

2. Walk towards the Boundary Zone until the Receiver Collar tone

sounds and the Test Light flashes. (4A).

3. Place a Boundary Flag in the ground (4B).

4. Walk back into the Pet Area until the repeating tone stops.

5. Repeat this process around the Boundary Zone until it is marked with

Boundary Flags every 10 feet.

The Boundary Flags may be in different parts of the Boundary Zone

and may not be in a line. The Boundary Zone is 2 to 3 feet wide.