Owner's Manual

38 1-800-732-2677
The Receiver Collar
activates in the
middle of the yard.
UÊThe Receiver Collar activates when it loses
the Transmitter signal. This sometimes
occurs if a large metal object is between
the Receiver Collar and Transmitter, if the
orientation of the Receiver Collar changes
near the Boundary Zone, or if the surrounding
“electronic noise” interferes with the signal.
If this continues to occur, consider relocating
the Transmitter and resetting the Pet Area.
The Receiver
Collar is beeping
but my pet is not
responding to the
Static Correction.
UÊMake sure the Static Correction Level is set
at 2 or above.
UÊTest the Receiver Collar with the Test Light.
UÊIf the Test Light flashes, check the fit of the
Receiver Collar.
UÊTrim your pet’s fur where the Contact Points
touch the neck and/or switch to the longer
Contact Points.
UÊContact Points must be in contact with
dog’s skin.
UÊIncrease the Static Correction Level.
UÊRepeat training steps to reinforce training.