Owner's Manual
36 1-800-732-2677
The Receiver
Collar is beeping
everywhere.
UÊCheck that the Transmitter is plugged into
a working standard 120-volt outlet, the
Power Light is on, and the Transmitter
controls are set at your desired settings.
UÊBring Receiver Collar within 10 feet of the
Transmitter to reset.
UÊMake sure no continuous alarm is sounding
on the Transmitter.
The Receiver Collar
is beeping inside
the house.
UÊIt is recommended to remove the Receiver
Collar from your pet when indoors to avoid
activation of the Receiver Collar.
UÊMake sure the Transmitter is
plugged in
and
set up according to the directions.
UÊEnsure the entire house is within the Pet
Area. The Transmitter may need to be
moved to adjust the Pet Area to include the
entire house.
UÊIf relocating the Transmitter, remove the
Receiver Collar from your pet before
removing power from the Transmitter.