Installation Guide

www.petsafe.net 33
The Receiver
Collar is beeping
everywhere.
•Check that the Transmitter is plugged into
a working standard 120-volt outlet, the
Power Light is on, and the Transmitter
controls are set at your desired settings.
•Bring Receiver Collar within 10 feet of the
Transmitter to reset.
•Make sure no continuous alarm is sounding
on the Transmitter.
The Receiver Collar
is beeping inside
the house.
•It is recommended to remove the Receiver
Collar from your pet when indoors to avoid
activation of the Receiver Collar.
•Make sure the Transmitter is plugged in and
set up according to the directions.
•Ensure the entire house is within the Pet
Area. The Transmitter may need to be
moved to adjust the Pet Area to include the
entire house.
•If relocating the Transmitter, remove the
Receiver Collar from your pet before
removing power from the Transmitter.