Owner's Manual

7
www.petsafe.net
Operating Guide
Step 1: Set Up the Transmitter
Important: You may need to move the Transmitter several times before determining the final location. The
Transmitter is located at the exact center of the Pet Area.
Place the Transmitter:
• At least 2 feet above the floor located on the ground floor of your home.
• In a dry, well ventilated, protected area.
• In an area where temperatures do not fall below -10°F (-23°C)
• On a non-metal table or other hard surface to ensure proper ventilation (1A).
• At least 3 feet from large metal objects, as these items may reduce the size and shape of your Pet Area (1B).
Placing the Transmitter inside a metal building or shed can reduce the maximum range of the Stay + Play Wireless
Fence
®
system.
You can also mount on a wall.
A mounting template is included on the back of this guide.
• Do not place anything on top of Transmitter or cover any ventilation holes. This may overheat the
Transmitter and cause early transmit failure.
• Do not place Transmitter in a closet or any other confined, unventilated area.
• Do not place Transmitter on a metal surface.
Power
Light
LOW
HIGH
Power
Jack
Boundary
Switch
Boundary
Control Dial
ALARM
Alarm Disable
Button
3 ft.
3 ft.
Wall Mount
Tabletop
1A 1B