Owner's Manual

13
www.petsafe.net
One-Person Method
Measure the shortest distance from the desired Boundary Zone to the Transmitter. Find the distance on the Transmitter
Range Chart on the next page and set the Boundary Switch and Boundary Control Dial. Hold the Test Light Contacts
to the Contact Points (4B). Take the Receiver Collar to the Boundary Zone with the logo side facing away from the
Transmitter and Contact Points facing upwards (4F). Hold the Receiver Collar at your pet’s neck level (4E) until the
Receiver Collar tone sounds and the Test Light flashes. If the Receiver Collar tone sounds before or after the desired
Boundary Zone, return to the Transmitter and adjust the Boundary Control Dial. Repeat this process until the Receiver
Collar tone sounds at the desired location. Record your settings on this page for future reference.
Transmitter Range Chart
Boundary Control Dial
Position
Boundary Switch LOW Boundary Switch HIGH
1 22 ft. 46 ft.
2 24 ft. 50 ft.
3 26 ft. 56 ft.
4 29 ft. 62 ft.
5 31 ft. 69 ft.
6 37 ft. 85 ft.
7 45 ft. 95 ft.
8 50 ft. 105 ft.
Note: These distances are approximate.
Record Your Settings
Location
Final Boundary Switch
Setting (HIGH or LOW)
Final Boundary Control
Dial Position (1–8)
Receiver Static
Correction Level (1–6)
Home
Camping
Vacation
Other