Owner's Manual

16 Customer Care Center 1-800-732-2677
To Cancel Pause Feed Mode:
1. If buttons are locked, press ENTER and UP buttons AT SAME TIME to unlock.
2. Press the DOWN button until the pause indicator “
ll ” is removed from the LCD screen
and displays the next scheduled meal.
View/Change Time
While in Operating Mode you can view the time set during the Initial Setup steps. Also you
can change the time or time format if you move to a different time zone or country or during
Daylight Saving Time.
To View Time:
1. If buttons are locked, press ENTER and UP buttons AT SAME TIME to unlock.
2. Press the UP button and the time will display on the LCD screen. DO NOT HOLD
button for 5 seconds or more, or you will enter the time setup menu.
To Change Time Format:
1. If buttons are locked, unlock by pressing and holding ENTER and UP buttons AT
SAME TIME.
2. Press and HOLD the UP button for 5 seconds. The time setup menu will display with
the hour eld blinking.
3. Press LEFT button and LCD screen will display a blinking 12. Use UP and DOWN
buttons to scroll to select 12 hour or 24 hour format. Use steps 3 and 4 under “To
Change/Set Time” below to set the current hour and minute.
To Change/Set Time:
1. If buttons are locked, press ENTER and UP buttons AT SAME TIME to unlock.
2. Press and HOLD the UP button for 5 seconds. The time setup menu will display with
the hour eld blinking.
3. Use UP or DOWN buttons to scroll through numbers to set current hour with current
AM or PM if in 12 hour format. Press RIGHT button to move to minute eld.
4. Use UP or DOWN buttons to scroll through numbers to set current minute. After current
minute is set, press ENTER or RIGHT button to program new time.
Setup Mode
If you wish to change, add or remove a scheduled meal, you will need to return to Setup
Mode. You can even adjust meals if you are set to the default dog or default cat feeding
schedule.
Note:
The default dog and cat options are intended as quick setup for first time use.
The only way to return to a default feeding schedule is to remove batteries or power
adapter from feeder, wait 10 seconds and reinstall. This will take you back through the
Initial Setup steps.
To Return to Setup Mode:
1. While in Operating Mode, press and HOLD the ENTER button for approximately 5
seconds. The LCD screen will return to the meal menu and display the rst meal
currently scheduled.
2. See steps 2 through 8 under “To Set Custom Feeding Schedule (User)” page 13 for
details on changing the meal settings.
To Exit Setup Mode:
1. After programming desired number of meals, return to meal number eld. Press and
HOLD ENTER button for 5 seconds to program feeding schedule. This returns feeder
to Operating Mode and the screen will display the next scheduled meal.