Owner's Manual
Table Of Contents
8 Customer Care Center +1 (800) 732-2677
Test the Collar
1. Plug the charger into the Spray Bark Collar (4A, 4B).
2. While the charger is plugged in, press and hold the on/off button.
3. Continue to hold the on/off button while unplugging the charger
from the Spray Bark Collar. A yellow LED will appear.
4. Release the on/off button. After a 2 second delay, the following
will begin: the Spray Bark Collar will emit a tone then release spray.
Then, it will sound the normal power off tone and turn itself off.
Ensure the spray port is pointed away from your face.
5. The test can be stopped at any time by pressing the on/off button.
Function and Response Table
Function LED Light Response Beep Response
Spray collar is turned on Green LED illuminates Beeps low to high
Spray collar is turned off Red LED illuminates Beeps high to low
Collar is on Green LED Light flashes once every 5 seconds None
Spray activation None None
Low battery condition Red LED Light flashes 3 times every 5 seconds None
Low spray warning Yellow LED flashes once every 5 seconds for good battery
Yellow LED flashes 3 times every 5 seconds for low battery
None
Testing Yellow LED Light appears Beeps
No refill cartridge Red and green LED’s alternate flashing for 5 seconds, the
collar will turn off
4 beeps
Spray collar is on/
Cartridge is empty (will
not spray)
Yellow LED flashes once every 5 seconds for good battery
Yellow LED flashes 3 times every 5 seconds for low battery
None
Turning collar on/
Cartridge is empty (will
not spray)
Yellow LED flashes 2 times 2 beeps
4A
4B