Owner's Manual

Lights on the Wi-Fi and rake buttons change color to indicate litter box status:
Yellow, blinking
Yellow, solid
Blue, fast blinking
Blue/red blinking
Wi-Fi is enabled and the litter box is connected to the internet.
Wi-Fi is enabled and the litter box is trying to connect to the internet.
Wi-Fi is not enabled. To enable Wi-Fi, press and hold the Wi-Fi button for 10 seconds, or until it starts blinking yellow .
The litter box is ready to connect lo your phone. Open the My PetSafe® opp and follow the on-screen instructions to connect.
The litter box is connected lo your phone but is not yet connected to the internet.
The Wi-Fi password you entered is incorrect. Try again.
The litter box has power and is functioning normally, with the rake in the home position.
The rake timer is counting down, or raking is currently in progress.
The rake is paused. This happens if you press the rake button while the rake is in motion.
A mechanical error has occurred during the rake cycle. Clear any obstructions near the rake, then press the rake button. The
rake should finish the cycle and return to the home position. If the error persists, the light turns solid red.
Clear any obstructions near the rake and clean the sensors. If the error persists, contact our friendly team at Customer Care
for assistance.