User guide

Step 2 Turning the collar ON and OFF

Step 1 Power Up

Quick Start Guide IUT-300 & IUT-302

INNOTEK

UltraSmart

™

Micro Remote Trainer, 300 yards

Remote: Insert 12v alkaline battery in the handheld remote.

Replace the access panel.

Collar: Charge the collar on the power outlet-mounted charging

station.The light on the collar will glow red while charging, and green when fully charged.

a. Press theCbutton (for collar) on the remote once or

twice until D appears in the display.

b. Hold the collar one inch from the remote, taking care not

to touch the metal contacts that touch your dog’s skin.

c. Press thetbutton.The collar will emit a

start-up tone,and the light will glow solid green.

d. To turn collar OFF, hold collar and remote one inch apart and press thetbutton.The collar

will emit a shut-down tone, and the light will glow solid red,then go out.

NOTE: IUT-302 users,repeat the procedure with the second collar.

This ON/OFF command only works when remote and collar are in close proximity; it will not work

at a distance. Never turn the unit ON/OFF while your dog is wearing the collar.