Owner manual

6 www.innotek.net
How the INNOTEK® Spray Bark Control Collar Works
 e INNOTEK® Spray Bark Control Collar e ectively stops barking when it is worn.  e Bark
Control Collar has a unique patented sensor that provides the most reliable bark detection
available.  e Bark Control Collar uses both vibration and sound sensors (dual-detection) to
discriminate each bark from other external noises. A burst of lemon-scented spray is emitted to
deter barking only if both the vibration from vocal chords and the sound from the bark match
the same criteria.
Important:
• DO NOT attach a lead to the Bark Control Collar. You may put a
separate non-metallic collar on your dog’s neck and attach a lead. Note:
Be sure the extra collar does not interfere with the Sensor Probe.
• Your dog may wear a harness for attaching a lead and/or tags while using
the Bark Control Collar.
• Before playing with your dog, turn the unit o and remove the Bark
Control Collar.  e activity may cause your dog to bark, which could
lead to him associating the play with the burst of spray.
• Never leave the Bark Control Collar on for more than 8 consecutive
hours.
_______________________________________________________
Key De nitions
Spray Nozzle: Where the spray
ejects when your dog’s bark is
detected.
Sound Activated Sensor: Detects
the sound of your dog’s bark.
Re ll Port: Where the spray is
re lled.
Yellow LED: Low spray indicator
Two Colour LED: Shows good or
low battery
Spray Nozzle
Refill PortSound
Activated Sensor
On/Off Button
Two Color LED
Yellow LED
Sensor Probe
On/O Button: Turns the collar on and o , and resets the spray counter.
Sensor Probe: Detects the vibrations of your dog’s bark.
Note:  e Sensor Probe is not adjustable.