Owner manual

2 www.innotek.net

Quick Start Guide

Step 1 Adjust the collar

Step 2 Power Up

Proper Fit:  e collar  t should be snug, yet loose

enough to allow one  nger to  t between the strap

and the dog’s neck. Fit is important because a loose

collar may cause inconsistent performance. Trim any

excess strap length.

 e collar should be o the dog for this step.

Insert battery, positive (+) side out.

Step 3 Fill the collar

 e collar should be o the dog for this step. Be certain the collar

is turned OFF. Hold the Lemon Spray can upright and press nozzle

 rmly into the Re ll Port. Hold for 15 seconds and remove.

Step 4 Using the collar

Press the On/O button until the green LED illuminates; release the button.

Put the collar on your dog, with the spray nozzle facing toward the dog’s

snout and fasten the strap. Allow your dog to wear the collar for several

minutes then re check the  t. You should notice a reduction in your dog’s

barking within the  rst couple of days that he wears the collar.

Important:  e Bark Control Collar should not be worn for more

than 8 hours out of every 24 hour period.

seconds