Owner's manual

FieldPro Owner’s Manual
9
Transmitter Display
The display stays on for 30 minutes after
a button press. After 30 minutes with no
button presses, the display shuts off.
Pressing any button will cause the
display to turn back on.
The various symbols you might see on
the display are explained below.
NNuummeerriicc rreeaaddoouutt
– Shows the chosen
stimulation level. Adjust with the
level up/level down (arrow) buttons. See
Set Stim Button Stimulation Level on
page 10.
DDoogg 11 // DDoogg 22
– Switch between
Receiver collars by pressing the Dog
Select button. The symbol displayed is
the active dog receiver collar. See
Two
Dog Systems
on page 15.
TToonnee
– This symbol appears whenever
Tone is part of the Stimulation type
selected. See
Program the Stim Type on
page 10.
PPrroogg
– This symbol appears when the
Transmitter is in programming mode.
See
Programming the Transmitter on
page 10.
BBaatttteerryy IInnddiiccaattoorr
– The battery indicator
provides constant awareness of your
battery’s power level. See
Battery
Indicator
on page 12 for more-detailed
information on the Battery Indicator.
RRAANNGGEERR OONNLLYY::
BBaacckklliigghhtt
– The Ranger Transmitter
features a backlit display. The Ranger
display backlight stays on for 5 seconds
after a button press.
CCoonnttiinnuuoouuss oorr
MMoommeennttaarryy
– If the straight line is shown
(——), the stimulation is in Continuous
mode. If just the dot is shown (•),
stimulation is in Momentary mode. See
C/M on page 8.
Tone/ON-OFF
Dog Select
Alternate
Stimulation
Stimulation
Level Down
Stimulation
Level Up
Stimulation
Tone/ON-OFF
Dog Select
Continuous/
Momentary
Alternate
Stimulation
Program
Stimulation
Level Down
Stimulation
Level Up
Stimulation
RANGER keypad above
SCOUT keypad below