Owner's manual

THE TRANSMITTER
The Transmitter signals the electronic
Receiver collar to produce a harmless,
yet effective stimulation and/or tone. The
no-slip grip feels comfortable in your
hand for extended periods of training or
field time.
Transmitter Keypad Buttons
TToonnee//OOnn--OOffff
– (upper right button) –
When pressed, causes the Receiver to
produce a tone.
No stimulation is
delivered. This
button is also used
to turn the Receiver on and off.
SSttiimmuullaattiioonn
(red central button)
referred to as the ‘Stim button,’
sends stimulation signal to the
receiver collar at the intensity shown in
the transmitter display. Button features
one raised bump to easily locate by
touch, even with gloves on! See
“Set
Stim Button Stimulation Level.”
on page
10.
LLeevveell ddoowwnn
&
LLeevveell uupp
– adjusts
the stimulation intensity through a range
of levels (from 1 Low to 15 High).
AAnn IINNNNOOTTEEKK EExxcclluussiivvee::
Hold either the
level up button or the level down button
for half a second for INNOTEK’s Rapid
Ramp
™
feature — display scrolls through
stim levels very quickly.
DDoogg SSeelleecctt
– (bottom center
button) – Switches Transmitter
control from Dog (Collar) 1 to Dog
(Collar) 2, and back, for training two
dogs. You can purchase a second collar
to expand the system for training two
dogs.
AAlltteerrnnaattee SSttiimmuullaattiioonn ((AAlltt SSttiimm))
– (top left red button) – When you press
the Alt Stim button, the
symbol displays.
Ranger owners
: you may program this
preset button to a desired stimulation
level. See
”Alternate Stimulation” on
page 11.
Scout owners
: This button is always set
to level 10 stimulation for use in strong
distractions or dangerous situations.
RRAANNGGEERR OONNLLYY::
CC//MM
– (bottom left button) –
Switches the stimulation
control between
CCoonnttiinnuuoouuss
stimulation (Receiver stims for
as long as button is pressed, up to 10
seconds) or
MMoommeennttaarryy
pulse
stimulation (one quick stim per button
press, also called Nick stimulation or
Brief-tap stimulation).
PPrrooggrraamm
– (bottom right button) – Hold
down this Prog button until
the PROG symbol appears in
the display, then release the
button. The Transmitter is now in
programming mode.
FieldPro Owner’s Manual
8
Ranger Scout
Throughout this manual, items in a bordered box apply to
RRAANNGGEERR OONNLLYY
.