Instructions / Assembly

www.petsafe.net 21
Test Light Instructions
1. Make sure the Receiver Collar battery is
properly installed. Set the Correction Level to
2 or above.
2. Hold the Test Light Contacts to the Contact
Points (I).
I
3. Walk toward the Boundary
Zone holding the Receiver
collar at your pet’s neck level (J)
until the Test Light flashes (K).
Save Test Light for future testing.
J
B
o
u
n
d
a
r
y
Z
o
n
e
Pet
Area
K
Note: If the Test Light does not flash, install a new battery and re-test.
If Test Light still does not flash, contact the Customer Care Center at
1-800-732-2677.