Instructions / Assembly
18 1-800-732-2677
Please refer to your PetSafe
®
Wireless Pet Containment System
™
Operating and Training Guide for a complete list of Frequently Asked
Questions and Troubleshooting or visit www.petsafe.net
Troubleshooting
The Receiver Collar
is not beeping or
administering a
Static Correction.
• Check that the Transmitter is plugged
into a working 120-volt outlet, turned on,
the Power Light is on, and the Transmitter
controls are set at your desired settings.
• Check Receiver battery to make sure it is
installed properly.
• When replacing the battery, do so while
standing within 5-10 feet of the Transmitter.
• Re-Synchronize the System. (Page 22)