Installation Guide

10 1-800-732-2677 www.petsafe.net 11

2A 2B

Sample Layouts

Sample 1:

Perimeter

Loop (Single

Loop) The

Perimeter

Loop is the

most common

layout. This

will allow

your pet to

freely and

safely roam

your entire

property

(2C). It can

also protect

gardens,

pools and

landscaping

(2D).

Sample 2 (2E): Perimeter Loop Using

Existing Fence (Single Loop)

This layout allows you to include your

existing fence as part of your layout and

keep your pet from jumping out or digging

under your existing fence. It reduces the

amount of wire which will need to be buried.

From the Fence Transmitter, run the wire to

A, A to B, B to C, C to D, D to E, E to A, twist

the wires from A back to the Fence

Transmitter. See the “Install the Boundary

Wire” section for more information on

attaching the wire to a fence.

Double Loop

A Double Loop must be used when you are not establishing the Boundary Zone on all sides

of your property.

When using a Double Loop, the Boundary Wire must be separated by a minimum of FIVE

FEET to avoid canceling the signal. Remember that a Double Loop will require twice as

much wire.