User guide

www.petsafe.net 5
Operating Guide
Prepare the Remote Transmitter
To Insert and Remove the Battery
1. Hold the Remote Transmitter face down and pull the battery door open (1A).
2. Insert the 9-volt battery with the positive side oriented as shown (1B).
3. Replace the battery door by positioning the bottom edge (1C), and snap the battery
door into place.
1C1A
1B
To verify the battery has been inserted correctly
1. Press either button on the Remote Transmitter.
2. The Transmitter Indicator Light should come on.
3. If the Transmitter Indicator Light does not come on, you may have inserted the
battery backwards. Try taking it out and turning it around.
4. If the Transmitter Indicator Light still does not come on, contact the Customer Care
Center at 1-800-732-2677.
Transmitter Indicator Light – Function and Response
Remote Transmitter Function Transmitter Indicator Light Response
Any button is pressed Solid in color
Low battery Flashes every 4 to 5 seconds
Step
1
0224B_03_400-721-11.indd 50224B_03_400-721-11.indd 5 26/2/05 2:18:44 am26/2/05 2:18:44 am