Manual

www.petsafe.net 13

FREN

STEP 2

Prepare the Receiver Collar

To Insert and Remove the Batteries

1. Remove the screws with a small Phillips screwdriver, applying

adequate pressure for the screwdriver head to  t snugly into

thescrew (2A).

2. Push the Battery Lid up according to the arrows stamped on the

Battery Lid (2A).

3. Slide the Battery Lid out.

4. Install two (2), 3-volt batteries positive (+) side up (2B). Slide the

Battery Lid into the Receiver Collar.

5. Reinstall the screws (2B). Do not over-tighten the screws.

The Receiver Collar is waterproof. When changing the batteries, be

sure to keep the area free of dirt and debris. Also, ensure the screws

are  ush with the Battery Lid. Replacement batteries (3-volt, CR2032)

can be found at many retailers. Contact the Customer Care Centre or

visit our website at www.petsafe.net for a list of common retailers.

TO REMOVE

SLIDE THEN LIFT

TO REMOVE

SLIDE THEN LIFT

Batteries

(CR2032)