User Manual

b) In Walls
Follow the instructions for “Wood and PVC/uPVC/Metal” by using the
enclosed cutting template. Please note that additional tools, materials and
competent DIY skills may be required.
FOR SAFETY REASONS IT IS NOT RECOMMENDED TO FIT THIS
PRODUCT TO GLASS.
Fitting your pet door
Your Staywell pet door is fi tted with the metal
security barrier on the inside of your house.
FIG.4
Temporarily, hold the inner pet door frame (with
fl ap) in position and mark fi xing holes.
FIG.5
Remove inner pet door frame.
Using a 7mm (
5
/
16
”) drill bit, drill holes
as indicated.
FIG.6
Take the outer pet door frame and insert the
sleeves into the 4 key-hole slots. Ensure angled
edges of sleeve heads are in position as
indicated.
FIG.7
From house exterior, hold the bottom screw
sleeves in the outer frame as indicated.
Sleeve Screw
Fits brick walls
3