Owner manual

www.petsafe.net 5
__________________________________________________________________________________________________
Add an Upright Post for the Gate
1. Gather 1 upright, 2 clamps , and 1 -
5
/
16
" x 2" carriage bolt with nut.
2. Install the gate post 22 ¼" to either side of the corner upright.
Important: Do NOT have the gate span a joint in the frame. The frame can come apart at the
swedged joint.
22
1
/
4
"
Note: Gate Opening is 22
1
/
4
" between posts. All swedged joints will be loose until fence fabric is installed.
Step
3