Datasheet

kind of bread, the size, the moisture
level and thickness of the slices.
Therefore choose a lower setting for
dry bread, small slices and when
toasting only one slice. When toa-
sting only one slice of bread the bro-
wning on the inside is more intensi-
ve.
In case of too intensive browning
a high quantity of acrylamide arises.
Therefore, you should avoid intensi-
ve browning.
STOP Interrruption of toasting
Should the bread get too dark, the
toasting can be interrupted at any
stage by pushing this button.
Preheating/Postheating facility
If this button is pressed immediately
after switching the appliance on,
already cold bread will get once
again warmed crustily and bread
which ist too lightly browned will be
browned once again.
Thawing
If the thawing button is pressed
immediately after switching the
appliance on, the toasting will auto-
matically be extended in order to
toast frozen bread.
Bread roll attachment
The toaster has an integrated bread
roll attachment. It is put up by
moving the button upwards towards
the slots.
Two bread rolls can be crisped up
from both sides when using a medi-
um setting. Moisten bread rolls
which are too dry before, so that
they tum out well.
Crumb tray
During toasting the crumbs which fall
down will be collected in the crumb
tray. For emptying pulling the crumb
tray out of the appliance.
Cleaning and maintenance
Before cleaning unplug the applian-
ce and let it cool down.
Remove any crumbs stuck to the
browning slots and grids and on the
heating elements with a brush. Do
not tilt the appliance because other-
wise the crumb tray would empty
into the inside of the appliance. Slide
out the tray, clean it and put it again
in the appliance.
Never immerse the toaster in water.
Clean the outside of the appliance
with a damp cloth and some deter-
gent only. Do not use caustic or
scouring cleansing agents.
For UK use only
1. This product is supplied with a 13 A
plug conforming to BS 1363 fitted
to the mains lead. If the plug is
unsuitable for your socket outlets
or needs to be replaced, please
note the following. If the plug is a
non-rewireable one, cut it from the
mains lead and immediately dis-
pose of it. Never insert it into a
socket outlet as there is a very
great risk of an electric shock.
2. The replacement of the plug at the
mains lead has to be done accor-
ding to the following instructions:
Warning - This appliance must
be earthed
Important: The wires in this
mains lead are coloured in accor-
dance with the following code:
green / yellow: Earth
blue: Neutral
brown: Live
As the colours of the wires in the
mains lead of this appliance may
not correspond with the coloured
markings identifying the terminals
in your plug, proceed as follows:
- the wire which is coloured green
and yellow must be connected to
the terminal which is marked
with the letter E or by ,the earth
symbol , or coloured green or
green and yellow,
- the wire which is coloured blue
must be connected to the termi-
nal which is marked with the
letter N or coloured black,
- the wire which is coloured brown
must be connected to the termi-
nal which is marked with the
letter L or coloured red.
3. If a 13 A (BS 1363) plug is used it
must be fitted with a 13 A fuse
conforming to BS 1362 and be
ASTA approved. If any other type
of plug is used, the appliance
must be proctected by a 10 A fuse
either in the plug or adapter or at
the distribution board. If in doubt -
consult a qualified electrician.
4. Never use the plug without closing
the fuse cover.
The appliance complies with
the European directives
2006/95/EC, 2004/108/EC
and 2005/32/EC.
At the end of its lifetime this
product must not be dispo-
sed of through the normal
domestic waste, but it
should be handed to an
assembly point for the recycling of
electrical and electronical applian-
ces. You can inquire about details at
the local administration.
Subject to technical changes.
5
TA15_100630_TA15_080603 06.07.10 11:17 Seite 5