User's Manual

6
The grip of the machine is autoclavable. The rest parts (body, power pack, rca plug) can
be sanitized from the outside with cold sterilization products.
After autoclaving you can use a hint of synthetic grease (eg Super Lube) around the
internal threading of the grip or on the O-rings of the machine’s body for optimal
and smooth operation.
Do not disassemble, modify, tamper with the machine or any of its parts.
IMPORTANT NOTES
Any cartridge brand and needle configuration is supported by this pen machine. Switch
between the included interchangeable cartridge receivers to work with Stigma®
Advanced Safety cartridges or standard cartridges of any brand.
Always prefer needles with a full membrane to avoid human fluids and/or ink from
entering the machine.
Store the machine in a secure place away from children or persons who cannot/do not
know how/are unable to operate this device.
Use of a high quality USB - C cable and power outlet for charging is recommended.
WARRANTY
The Force pen (body, aluminum grip) and the Power Pack have a 12-month
manufacturer’s warranty. Should these parts prove to be defective due to
manufacturer’s fault, Stigma-Rotary® will repair/replace these parts free of charge.
This warranty is void if the device shows signs of having been disassembled, modified,
tampered with, dropped, overexposed to moisture or any damage resulting in
compromised functionality.
Several external influences which cannot be controlled by the manufacturer can
adversely affect the motor or other machine parts. Damages or other faults to the
machine that may appear over time may have diverse causes and cannot automatically
be assumed as being of manufacturing origin.
The motor is excluded from the warranty because of the many factors that have an
impact on its lifespan and which cannot be influenced (controlled) by us. The
manufacturer defeats any claims. They refer, as we do, to extremely high standard of
quality production and end-control which guarantees that only 100% functioning motors
leave their production plant. The same is also true for those machines that leave our
production facilities.
A warranty cannot be applied to defects which are caused by normal wear (wear of
components caused by normal use such as springs, bearings, O-rings, screws etc.) or
improper handling, transport or storage by the customer.
TROUBLESHOOTING
Like every other mechanical device, we strongly recommend that you service your
tattoo machine at least once a year to ensure everything’s running as it should.