Installation & Assembly

Assembly

TIRE INFLATION

13) Check the pressure before using the stroller.

DO NOT INFLATE above the maximum recommended ination pressure that

is on the side of the tire. Over ination may cause the tire to blowout and could

result in serious injury.

NOTE: Only use hand pump.

DO NOT USE air compressor to inate the tire.

RAIN COVER (OPTIONAL)

14) Release the four rear attachments of the rain cover and place the rain cover

over the stroller (Fig. 14a). Attach the four rear attachments (Fig. 14b). Place

the front rain cover hook around the front wheel axle to secure the rain cover

(Fig. 14c).

Fig. 14a Fig. 14b Fig. 14c