operators_manual

– 11 –
Rev. 01/18
also included.
If the fault code generates an email, a record of that email can be found in the Email section.
The Details section expands out to show finer detail about a fault code. Fault Information gives a description of
the problem, a fault occurrence count, current state of the engine and any additional information. Troubleshooting
Guidance shows the possible causes if available and a check mark will show if there are items the driver can check or
perform to possibly avoid a service event.
The Event Location section includes the address of the where the fault event occurred. If you select the address
it pulls up a snapshot of the map and a pin indicating where the vehicle was located at the time the event was
reported.
The Snapshot Data section displays useful system information about your vehicle. Each event records 70 seconds of
data; 60 seconds prior to the event and 10 seconds after.
The Authorized Dealer for Repair section shows the three nearest authorized dealerships. Contact information,
Hours of Operation, Phone Number and Approximate Distance from the vehicle’s location at time of the event are
Peterbilt SmartLINQ Manual