operators_manual
Table Of Contents
- Engine Operation
- Safety - Introduction
- Emergency - What To Do If
- Operating Instructions
- Engine Warning Lamps
- Stop Engine Lamp
- Engine, Check Engine
- Malfunction Indicator Lamp
- Diesel Particulate Filter (DPF) Warning Lamp
- High Exhaust System Temperature (HEST) Warning Lamp
- Diesel Exhaust Fluid (DEF) Lamp
- Engine Wait-To-Start Lamp
- Engine Braking System
- Driving
- Normal Starting Procedure
- Cold Weather Starting
- Starting Procedure After Extended Shutdown or Oil Change
- Operating the Engine
- Engine Operating Range
- Extended Idling
- Engine Shutdown
- Electromagnetic Interference
- Operating on Level and Dry Pavement
- Operating on Grades and Dry Pavement
- Tips for Operation on Slick Roads
- Engine Maintenance
- Maintenance Requirements
- Maintenance Schedule Intervals
- Preventative Maintenance Schedule
- Engine Specifications
- Engine Lubricating Oil Recommendations and Specifications
- Engine Oil Capacities and Pressures
- Engine Lubrication and Filter Intervals
- Cooling System Maintenance
- Engine Coolant Specifications
- Extended Life Coolant
- Fuel Recommendations
- Warranty and the Use of Biodiesel Fuel
- Recommendations to Avoid Fuel Gelling
- Diesel Exhaust Fluid Recommendations and Specifications
- Maintenance Procedures
- Engine Identification
- Engine Warranty
- Index
1. Dataplate
2. Engine Serial Number
If the engine dataplate (1) is NOT legible,
the ESN (2) can be found on the engine
block, on top of the lubricating oil cooler
housing. Additional engine information is
on the electronic control module (ECM)
dataplate.
Fuel Injection Pump Dataplate
The Bosch fuel injection pump dataplate is
located on the fuel pump.
Bosch dataplate includes:
• Pump serial number
• PACCAR part number
• Factory code
• Bosch part number
• Date code
Engine Control Module Dataplate
NOTE
Not all engines have ECM dataplates.
The engine control module (ECM)
dataplate is located on the front of the
ECM. The following information is found on
the engine control module dataplate:
• ECM part number (PN)
• ECM serial number (SN)
• ECM date code (DC)
• Engine serial number (ESN)
• ECM Code: identifies the software in
the ECM.
NOTE
The presence of an ECM dataplate de-
pends on the manufacturing plant and
the date the engine was manufac-
tured. If an ECM dataplate was not in-
stalled by the manufacturing plant, cal-
ibration data can be found on the en-
gine dataplate.
ENGINE MAINTENANCE - Engine Identification
Y53-1185-1E1 (04/16/18) 71
2