operators_manual
Table Of Contents
- Contents
- Engine Operation
- Safety - Introduction
- Emergency - What To Do If
- Operating Instructions
- Engine Maintenance
- Maintenance Requirements
- Maintenance Schedule
- Engine Specifications
- Engine Lubricating Oil Recommendations and Specifications
- Engine Oil Specifications
- Engine Lubrication and Filter Intervals
- Cooling System Maintenance
- Engine Coolant Specifications
- Extended Life Coolant
- Fuel Recommendations
- Warranty and the Use of Biodiesel Fuel
- Recommendations to Avoid Fuel Gelling
- Maintenance Procedures
- Engine Oil Level
- Engine Oil Filter
- Crankcase Ventilation (CCV) Module Maintenance
- Fuel Filter
- Cooling System
- Drive Belts
- Engine Belt Checks
- Fan Belt Tensioner
- Engine Fan
- Poly V-belt and Fan Drive Belt Removal
- Poly V-belt and Fan Drive Belt Installation
- Poly V-belt, Alternator, Air-Conditioning Compressor Drive and Coolant Pump Drive Removal
- Poly V-belt, Alternator, Air-Conditioning Compressor Drive and Coolant Pump Drive Install
- Aftertreatment System
- Air System
- Air Intake System
- Turbocharger
- Exhaust System
- Charging - Cranking System
- Crankshaft - Vibration Damper
- Engine Mounting Bolts
- Engine Valves
- Engine Identification
- Engine Warranty
- Index
Warnings
The safety message following this symbol
and signal word provides a warning against
operating procedures which could cause
death or injury. They could also cause
equipment or property damage. The alert
will identify the hazard, how to avoid it and
the probable consequence of not avoiding
the hazard.
WARNING
Hot engine oil can be dangerous. You
could be burned.
Let the engine oil
cool down before changing it. Failure
to comply may result in death, person-
al injury, equipment or property dam-
age.
Cautions
The safety message following this symbol
and signal word provides a caution against
operating procedures which could cause
equipment or property damage. The alert
will identify the hazard, how to avoid it, and
the probable consequence of not avoiding
the hazard.
CAUTION
Continuing to operate your vehicle with
insufficient oil
pressure will cause seri-
ous engine damage. Failure to comply
may result in equipment or property
damage.
Notes
The message following this symbol and
signal word provides important information
that is not safety related but should be
followed. The alert will highlight things that
may not be obvious and is useful to your
ef
ficient operation of the vehicle.
NOTE
Pumping the accelerator will not assist
in starting the engine.
Forward
How to use this manual.
This manual contains information for the
correct operation and maintenance of your
PACCAR engine. Read and follow all
safety instructions. Refer to the WARNING
in the
General Safety Instructions on page
7. Keep this manual with the equipment.
If the equipment is traded or sold, give the
manual to the new owner.
The information, specifications, and
recommended maintenance guidelines in
this manual are based on information in
effect at the time of printing. PACCAR
reserves the right to make changes at any
time without obligation. If you find
differences between your engine and the
information in this manual, contact your
local PACCAR Authorized Repair Location
or write to:
PACCAR c/o PACCAR Engines
ENGINE OPERATION - Safety - Introduction
6 Y53-1181-1K1 (08/2018)
1