operators_manual
Table Of Contents
- Contents
- Engine Operation
- Safety - Introduction
- Emergency - What To Do If
- Operating Instructions
- Engine Maintenance
- Maintenance Requirements
- Maintenance Schedule
- Engine Specifications
- Engine Lubricating Oil Recommendations and Specifications
- Engine Oil Specifications
- Engine Lubrication and Filter Intervals
- Cooling System Maintenance
- Engine Coolant Specifications
- Extended Life Coolant
- Fuel Recommendations
- Warranty and the Use of Biodiesel Fuel
- Recommendations to Avoid Fuel Gelling
- Maintenance Procedures
- Engine Oil Level
- Engine Oil Filter
- Crankcase Ventilation (CCV) Module Maintenance
- Fuel Filter
- Cooling System
- Drive Belts
- Engine Belt Checks
- Fan Belt Tensioner
- Engine Fan
- Poly V-belt and Fan Drive Belt Removal
- Poly V-belt and Fan Drive Belt Installation
- Poly V-belt, Alternator, Air-Conditioning Compressor Drive and Coolant Pump Drive Removal
- Poly V-belt, Alternator, Air-Conditioning Compressor Drive and Coolant Pump Drive Install
- Aftertreatment System
- Air System
- Air Intake System
- Turbocharger
- Exhaust System
- Charging - Cranking System
- Crankshaft - Vibration Damper
- Engine Mounting Bolts
- Engine Valves
- Engine Identification
- Engine Warranty
- Index
using the retarding power of the engine
alone and more braking power is required,
switch the two-position selector switch to
the “LOW” position and activate the engine
brakes by switching the “ON/OFF” switch
to the “ON” position. If the vehicle’s drive
wheels begin to skid or there is a fishtailing
motion, switch the “ON/OFF” switch to the
“OFF” position. If traction is maintained
when the engine brakes are activated and
more braking power is required, move the
two-position selector switch to the “HI”
position. Again, if the vehicle has lost
traction or if there is a fishtailing motion,
switch the “ON/OFF” switch to the “OFF”
position. DO NOT attempt to use the
engine brakes in the “HI” position.
ENGINE OPERATION
- Operating Instructions
Y53-1181-1K1 (08/2018) 27
1