operators_manual

5. Install the new centrifugal oil filter
element onto the centrifuge base.
Installing Centrifugal Oil Filter into Base
6. Mount the screw cap on the
centrifuge base.
7. Turn the screw cap
counterclockwise to lock it.
Installing and Locking Cap
8. Lightly lubricate the new O-rings
(1) with engine oil.
9. Fit the new O-rings (1) onto the
screw cap (1) and onto the
centrifuge base (2).
Installing O-rings onto Screw Cap and Insert into
Base
1
2
10. Position the screw cap carefully
onto the oil module.
11. T
ighten the screw cap by hand until
it reaches the end position.
12. Tighten the screw cap to 52 lb-ft
(70 N·m). Use a hexagonal socket,
or box wrench, to avoid damaging
the oil filter cap.
ENGINE MAINTENANCE - Maintenance Procedures
Y53-1166-1G1 (08/2018) 55
2