operators_manual
Table Of Contents
- Contents
- Engine Operation
- Safety - Introduction
- Emergency - What To Do If
- Operating Instructions
- Engine Maintenance
- Maintenance Requirements
- Maintenance Schedule
- Engine Specifications
- Engine Lubricating Oil Recommendations and Specifications
- Engine Oil Specifications
- Engine Lubrication and Filter Intervals
- Cooling System Maintenance
- Engine Coolant Specifications
- Extended Life Coolant
- Fuel Recommendations
- Warranty and the Use of Biodiesel Fuel
- Recommendations to Avoid Fuel Gelling
- Maintenance Procedures
- Engine Oil Level
- Engine Oil Filter
- Crankcase Ventilation (CCV) Module Maintenance
- Fuel Filter
- Cooling System
- Drive Belts
- Engine Belt Checks
- Fan Belt Tensioner
- Engine Fan
- Poly V-belt and Fan Drive Belt Removal
- Poly V-belt and Fan Drive Belt Installation
- Poly V-belt, Alternator, Air-Conditioning Compressor Drive and Coolant Pump Drive Removal
- Poly V-belt, Alternator, Air-Conditioning Compressor Drive and Coolant Pump Drive Install
- Aftertreatment System
- Air System
- Air Intake System
- Turbocharger
- Exhaust System
- Charging - Cranking System
- Crankshaft - Vibration Damper
- Engine Mounting Bolts
- Engine Valves
- Engine Identification
- Engine Warranty
- Index
CAUTION
Extending the oil and filter change in-
terval beyond the
recommendations
will decrease the engine life due to
factors such as
corrosion, deposits,
and wear. Engine oil filters capture dirt
and remove deposits from the oil to
prolong the life of internal moving com-
ponents. Follow the oil and filter
change intervals as
recommended in
this section of the manual. Failure to
comply may result in equipment or
property damage.
Determining Type of Vehicle Application for Engine Oil Drain Intervals
Severe Duty - Vocational * Normal Duty - Line Haul
Fuel Consumption Less than 6 MPG (2.6 km/L) 6 MPG (2.6 km/L) or greater
Gross Vehicle Weight Greater than 80,000 lb. (36,300 kg) 80,000 lb. (36,300 kg) or less
* Vocational vehicle applications include: Agriculture, Concrete Mixers, Construction, Crane, Dumps, Emergency/Fire, Heavy
Equipment, Loggers, Mining, Oil Field, Refuse, Pick-up & Delivery, Snowplows, and Wrecker
.
ENGINE MAINTENANCE - Engine Lubrication and Filter Intervals
Y53-1166-1G1 (08/2018) 41
2