operators_manual

Low Voltage
Disconnect
(Optional)
Set voltage threshold for
disconnect
Anti-Theft
(Optional)
Enable/disable anti theft function
Driver Information Display Alarm
On/Off
When in the Settings Menu,
1. Scroll through the list of menu
items to “Alarm”.
2. Press the to enter the alarm menu.
3. Press the to turn the alarm ON or
OFF.
Off
Units: Standard
- Format: 12 hr.
Time: Home
Alarm:
Settings:
12:39
PM
78
F
25,326
Mi
How to Set Clock Display Format
Use these steps to switch between 12 hr or
24 hr time display format.
When in the Settings Menu,
1. scroll through the list of menu items
to “Format”.
2. Press the to toggle between either
12 hour (AM/PM) or 24 hour
(military) time.
How to set the Driver Information
Display clock
These steps will help set the home, local or
alarm time in the display
06
Spin then Push
Settings:
AlarmTime
:00
am
12:39
PM
78
F
25,326
Mi
1. When in the Settings Menu, scroll
through the list of menu items.
2. Press the to select the item to
change.
3. Rotate the knob to change the
hour. Press the .
4. Rotate the knob to change the
minutes. Press the .
5. Rotate the to toggle AM/PM. Press
the .
6. Press the button above the to Exit.
Anti Theft Menu
This menu selection allows the operator to
turn the antitheft feature on or off. With the
anti theft feature turned off, the operator
will not need a passcode to start the
engine.
The default passcode is set to 0000 at the
factory. Please see an authorized dealer if
a custom passcode is needed.
Guide to the Warning
Symbols
Information and color of warning symbols.
The warning lights and audible alarm may
indicate a system malfunction. Check the
lights frequently, and respond properly as
CONTROLS - Guide to the Warning Symbols
74 Y53-6047-2HEN (03/18)
3