operators_manual

treat trips separate from each other, or as
segments of a combined trip.
6.8
MPG
Avg = 58 mph
__
Avg
++
Trip Info:
12:39
PM
78
F
25,326
Mi
When driving, the screen only allows you
to toggle which trip is viewed in the trip
odometer and set the active/inactive
status. When parked you can select and
view a variety of data collected for each
trip, as seen in the list below:
• Trip Economy
• Trip Average Speed
• Trip Engine Hours
• Trip Fuel Used
• Time in Cruise Control (%)
• Time in Sweetspot (%)
• Time in Overspeed (%)
• Trip Idle Hours
• Trip Idle Percentage (%)
• Trip Idle Fuel Used
• Trip Idle Percent Used (%)
• PTO Total Hours
• PTO Trip Hours
• PTO Trip Percentage (%)
• PTO Total Fuel Used
• PTO Trip Fuel Used
• PTO Trip Economy
The cluster mounted trip reset button is
used to zero and clear accumulated trip
data. Short presses toggle between the
odometer view, and the four trips. Holding
the button when on a particular trip will
zero the stored data and also automatically
set the cleared trip to “active” status. Using
the knob while in this screen will only
activate or deactivate a trip function.
NOTE
PTO options in the display will only be
shown if the vehicle is equipped with a
PTO.
Truck Information
This function displays the VIN specific
information. This information is available
when the vehicle is parked.
Chassis
ABS
Trans
Engine
Truck Info:
12:39
PM
78
F
25,326
Mi
1. Chassis Information
• Chassis Number
• Fleet ID
• CECU Software Version No.
2. Engine Information
• Engine Make
• Engine Model
• Engine Software Version
• Governed Speed Limit
• Engine Power
3. Transmission Information
CONTROLS - Truck Information
Y53-6047-2HEN (03/18) 71
3