operators_manual

the tires and display the information
accordingly. When scrolling through each
tire’s information, the relevant tire will
appear highlighted in the menu screen. A
warning message will appear if the system
detects a tire temperature or pressure that
is outside of normal parameters. This
information is only available when parked
Virtual Gauges
The virtual gauges function is selected
through the rotary knob and is available in
both parked and driving modes.
Gauges:
Tach
1350 RPM
SweetSpot
12:39
PM
78
F
25,326
Mi
Virtual gauges provide dynamic information
about the vehicle's performance. Spin the
button to scroll through the available
gauges and push to select the desired
gauge to view.
Ignition Timer
To Set Timer
Push Then Spin
IgnitionTimer:
12:39
PM
78
F
25,326
Mi
This function allows the driver to set a
timer to shut off the truck. This feature is
only available when the vehicle is parked.
After the timer is set, the ignition key may
be turned to the off position and removed.
The engine will continue to run for the
programmed time.
Fuel Economy
This function displays the dynamic fuel
economy performance of the vehicle.
6.8
MPG
Avg = 58 mph
__
Avg
++
Trip Info:
12:39
PM
78
F
25,326
Mi
It shows Average Speed, Average Fuel
Economy, and a dynamic instantaneous
indication of fuel economy above or below
the current average. The screen is
available when driving. Average fuel
economy is computed by the fuel
consumed during the trip (see the next
section for Trip information). The fuel
economy for a trip will be reset when that
trip odometer is reset.
Trip Information
This function allows you to keep trip
information data on up to four separate
trips – labeled A, B, C, and D. Trips are
also selectable as “Active” or “Inactive” so
you can use the data logging function to
CONTROLS - Virtual Gauges
70 Y53-6047-2HEN (03/18)
3