operators_manual

differently depending if the vehicle is
moving or parked. The following images
provide an example of a screen to get
familiarized with the interface.
1. Trunk
2. Branch
3. Leaf
Trunk Level
At this level, you can navigate between
functions by turning the The Menu Control
Switch (MCS) function by pushing the
knob; at which you would then be going to
what is termed the “branch” level of the
software.
Branch Level
In the branch level of functions, the The
Menu Control Switch (MCS) knob rotation
controls a cursor highlight. When
something is highlighted, an The Menu
Control Switch (MCS) push will select that
item or toggle its contents. Toggle fields
typically use a darker colored text to
distinguish them from fields that take the
user to the “Leaf level”.
Leaf Level
At this level, there are no more options to
choose from. The The Menu Control
Switch (MCS) can be used to scroll
through various information and the back
button can be used to revert up to the
branch (one push) or the trunk (two
pushes) levels of the system.
Odometer/Trip Odometer
The Odometer/Trip Meter comes on when
the door is opened and when the ignition
key is in the ACC or ON position. The
odometer displays the distance your
vehicle has traveled.
6.8
MPG
Avg = 58 mph
__
Avg
++
Trip Info:
12:39
PM
78
F
25,326
Mi
The display can be configured to display
Metric units or English units. The current
trip odometer displays how far the vehicle
has gone on a particular trip and can
display in increments of a tenth of a unit.
The maximum distance that can be shown
on the trip odometer is 9999.9 before it
rolls over to zero. To reset the trip
odometer, press and hold the button on the
cluster. The numbers will reset to 0 and
begin to count new miles/km traveled.
Press the trip button on the instrument
cluster any time you wish to view the
odometer reading, Press the trip button
again to scroll through the other odometers
available in the cluster.
CONTROLS - Odometer/Trip Odometer
Y53-6047-2HEN (03/18) 67
3